Centerville, MA

Master Bathroom Remodel on Cape Cod, MA

Last reviewed May 2026 by WM Construction, Licensed MA General Contractor

WM Construction handles full master bathroom remodels across Cape Cod, typically 75 to 150 square feet, with comprehensive scope: dual vanities, walk-in or curbless shower, separate water closet, heated tile floors, premium fixtures, and integrated lighting. Master baths run 4 to 8 weeks on site once selections are finalized, with structural engineering and permit timelines adding 2 to 4 weeks at the front end where layout changes apply. Trade sequencing, demo, framing, plumbing rough, electrical rough, waterproofing, heated mat, tile, fixtures, finish, is what separates a clean 6-week project from one that drags. Licensed MA General Contractor since 2016, HIC registered, EPA RRP Lead Safe certified, approved Hanscom Air Force Base vendor since 2015. Office: 1550 Falmouth Road, Suite 26, Centerville, MA 02632. Call (774) 224-8561.

Call Now Get a Free Estimate

5.0Google Rating

39Verified Reviews

9+Years in Business

✓MA Licensed GC + HIC + EPA RRP

★Free In-Home Estimate

Master Bathroom Remodel for Cape Cod Homeowners

Most Cape Cod master bathroom remodels come from one of three triggers. End-of-life replacement of dated master bathrooms (typically 1980s or 1990s vintage) where fixtures, finishes, layout, and waterproofing have all reached the point where targeted repair makes less sense than comprehensive scope. Primary suite expansion where the existing master bath is being enlarged by absorbing closet space, hallway, or adjacent bedroom area to create a larger primary suite footprint. Aging-in-place planning where the homeowner is staying in the home long-term and wants comprehensive accessibility scope including curbless shower entry, grab bar blocking, comfort-height fixtures, and slip-resistant flooring as part of the remodel.

The defining technical reality of master bathroom scope is multi-trade coordination. Standard bathroom remodels involve plumbing, electrical, and finishes. Master bathroom remodels involve all of those plus often heated floor systems, premium glass enclosures, dual vanities requiring duplicated plumbing, separate water closet enclosures, and integrated lighting plans. Trade sequencing must be coordinated correctly across the 4 to 8 week project, with milestone inspections at framing, plumbing rough-in, electrical rough-in, and final. WM Construction is a Cape Cod-based licensed Massachusetts general contractor, not a national franchise booking jobs through a 1-800 line, operating from Centerville since 2016 and an approved Hanscom Air Force Base vendor since 2015.

Configuration Tier	Typical Footprint	Defining Scope	On-Site Timeline
Standard master bath	75–100 sqft	Single/dual vanity, walk-in shower, tile floor	4–6 weeks
Expanded master suite	100–150 sqft	Dual vanity, larger shower, separate WC, dressing area	5–7 weeks
Aging-in-place	Any size	Curbless shower, grab-bar blocking, comfort-height fixtures	4–7 weeks
Spa-tier	100+ sqft	Heated floor, steam shower, body sprays, freestanding tub	6–8 weeks

Types of Master Bathroom Remodel Configurations for Cape Cod Homes

Standard Master Bath (75 to 100 sqft)

Standard master bath scope handles 75 to 100 square foot master bathrooms with single or dual vanities, walk-in shower, toilet (sometimes in separate water closet), and tile floor. Most common Cape Cod master bath footprint. Best for homeowners refreshing existing master baths within current footprint without major layout changes.

Expanded Master Suite (100 to 150 sqft)

Expanded master suite scope handles 100 to 150 square foot bathrooms typically created by absorbing closet, hallway, or adjacent bedroom area. Includes dual vanities, larger walk-in shower or freestanding tub plus shower, separate water closet, and often a dedicated dressing or makeup area. Best for primary suite renovations where additional square footage is being annexed.

Aging-in-Place Master Bath

Aging-in-place master bath scope incorporates ADA-aligned features throughout: curbless shower entry, grab bar blocking installed in framing, comfort-height toilet (17 to 19 inches), slip-resistant flooring, lever-handle faucets, and adequate maneuvering clearance. Best for homeowners planning long-term residence and wanting accessibility scope built in rather than retrofitted later.

Spa-Tier Master Bath

Spa-tier master bath scope adds premium features beyond standard fixtures: heated tile floors, towel warmers, steam shower, body sprays, freestanding soaking tub, integrated lighting plan with dimmer scenes, smart-home integration.

What to Expect from Master Bathroom Remodel Done Right

Multi-Trade Coordination Across the Full Project

Master bathroom scope involves demolition, structural framing (where layout changes), plumbing for dual vanities and expanded fixture count, electrical for GFCI circuits and integrated lighting, waterproofing membrane on all wet zones, heated floor system if specified, tile setting, glass enclosure installation, and finish carpentry. Coordinating trades correctly across 4 to 8 weeks is what separates licensed General Contractors from individual subcontractors managing themselves.

Heated Floor Systems Installed Before Tile

Heated tile floors (electric mat systems most common) install between substrate and tile, with the thermostat circuit run in the wall during electrical rough-in. The mat must be installed correctly with no overlaps, no kinks, and proper thinset coverage. Real installation includes a continuity test before tile goes on, because failed mats cannot be repaired without removing the tile they are buried under.

Plumbing for Dual Vanities and Expanded Fixture Count

Master baths with dual vanities require duplicated supply and drain runs (two of each rather than one). Walk-in showers with body sprays add additional supply runs. Separate water closets require dedicated drain and vent. Plumbing rough-in must accommodate all fixture locations correctly per Massachusetts 248 CMR plumbing code.

Aging-in-Place Features Designed Into Framing

Aging-in-place features (grab bar blocking, curbless shower drain recess, structural support for shower seat) must be installed during framing, not retrofitted after tile. Grab bar blocking installed during framing costs minimal labor; retrofitted installation requires tile demolition. Specifying aging-in-place during initial planning preserves all options for later years even if the homeowner does not currently need the features.

One Year Workmanship Warranty in Writing

Every WM Construction master bathroom remodel scope closes with a written one year workmanship warranty on the install work. Manufacturer warranties on fixtures, heated floor systems, glass, tile, and waterproofing remain separate.

How We Handle Master Bathroom Remodels on Cape Cod

1

Step 1, Site Visit, Existing Condition Assessment, and Scope Discussion

Onsite walkthrough at your Cape Cod home to inspect existing master bath condition, identify failure modes, discuss layout changes if any (closet absorption, wall removal, footprint expansion), assess plumbing and electrical capacity, and discuss configuration tier (standard, expanded suite, aging-in-place, spa-tier). Pre-1978 lead paint flag raised. Typically 1 to 2 hours on site.
2

Step 2, Selection, Specification, and Written Estimate

You select fixtures, tile, vanities, glass, lighting, heated floor system if specified, and any aging-in-place features. Selections finalized in writing before contract signing. Estimate breaks out demolition, framing changes, plumbing rough-in, electrical rough-in, waterproofing, heated floor system, substrate prep, tile, fixtures, glass, and finish carpentry as distinct line items.
3

Step 3, Contract, Permits, and Material Sourcing

Contract signed with milestone schedule. Building permit pulled with the Cape Cod town under 780 CMR. Plumbing (248 CMR) and electrical (527 CMR) permits pulled separately. Insurance certificates delivered before mobilization. Material delivery coordinated to align with installation phases.
4

Step 4, Demolition, Framing, Plumbing Rough-In, and Electrical

Demolition with EPA RRP containment on pre-1978 surfaces. Framing changes where layout requires. Plumbing rough-in for dual vanities, walk-in shower, and water closet inspected by Cape Cod town inspector. Electrical rough-in for GFCI circuits, integrated lighting, and heated floor thermostat inspected. Aging-in-place blocking installed where specified.
5

Step 5, Waterproofing, Heated Floor, Tile, Fixtures, and Walkthrough

Waterproofing membrane installed on all wet zones. Heated floor system installed and continuity tested. Tile set and grouted. Fixtures and glass enclosure installed. Vanities, lighting, and finish carpentry completed. Final inspection scheduled and punch list closed.

What Affects the Cost of a Master Bathroom Remodel on Cape Cod

Cape Cod master bathroom remodel cost is shaped by configuration tier, square footage, fixture and finish selections, and structural complexity. Configuration tier is the largest variable: standard master bath runs lower, expanded master suite runs higher due to additional square footage and fixture count, aging-in-place adds modest scope for blocking and ADA-aligned fixtures, spa-tier runs highest due to premium features and integrated systems. Square footage drives base material and labor cost.

Fixture selection swings cost meaningfully: standard residential-grade fixtures vs premium plumbing brands (Kohler, Toto, Hansgrohe, Brizo) vs custom or imported options. Tile and stone selections (standard ceramic vs porcelain vs natural stone vs imported) drive significant material cost. Heated floor systems add material and electrical scope. Glass enclosure type (framed, semi-frameless, frameless) affects cost. Layout changes (wall removal, closet absorption, footprint expansion) add structural and permit cost. We provide line item estimates rather than square foot pricing because square foot numbers obscure the configuration-tier and finish-level decisions that drive total cost. Call (774) 224-8561.

Customer Reviews

What Cape Cod Homeowners Say About WM Construction

5.0

★★★★★

39 Google Reviews

See All Reviews on Google →

★★★★★

WM did our entire master suite remodel, absorbed an old closet to expand the footprint, dual quartz vanity, curbless tile shower, heated floor, separate water closet. Six weeks on site, clean schedule, every inspection passed first time. Marcelo is the reason we used them.

Verified Google Reviewer Google

★★★★★

We added grab-bar blocking and a curbless shower in our Falmouth master bath even though we don't need them yet. Jackeline pushed for it during planning and we're glad. Tile is gorgeous, heated floor works perfectly, and we know we won't have to tear it apart in 15 years.

Verified Google Reviewer Google

Master Bathroom Remodels Across Cape Cod and the South Shore

WM Construction remodels master bathrooms across Cape Cod and Barnstable County, Upper Cape (Bourne, Sandwich, Falmouth, Mashpee), Mid-Cape (Barnstable, Centerville, Yarmouth, Dennis), and the Outer Cape (Brewster, Harwich, Chatham, Orleans, Eastham). We also serve Plymouth and South Shore communities just over the Sagamore Bridge and Bourne Bridge. Year-round homeowners scoping end-of-life master bath replacements, primary suite expansions, aging-in-place comprehensive remodels, and spa-tier upgrades all schedule projects through the same licensed crew.

Office and showroom: 1550 Falmouth Road, Suite 26, Centerville, MA 02632. Call (774) 224-8561 to schedule an on-site master bath remodel consultation. Approved Hanscom Air Force Base vendor since 2015.

Common Questions About Master Bathroom Remodels on Cape Cod

Do I need a permit for a master bathroom remodel in Massachusetts?

Yes, every master bath remodel requires a building permit under 780 CMR, plus separate plumbing (248 CMR) and electrical (527 CMR) permits. Layout changes that touch load-bearing walls require structural sign-off in addition. WM Construction pulls every required permit, schedules each rough-in inspection, and gives you the closed-out paperwork at project completion.

How long does a master bathroom remodel take on Cape Cod?

Master bathroom remodels typically run 4 to 8 weeks on site. Standard master baths run 4 to 6 weeks. Expanded master suites with layout changes run 5 to 7 weeks. Spa-tier remodels with heated floors and integrated systems run 6 to 8 weeks. Material lead times for custom fixtures, tile, or glass can extend total project time.

Should I add aging-in-place features even if I don't need them now?

Strongly recommended. Aging-in-place features (grab bar blocking, curbless shower entry, comfort-height fixtures) cost minimal additional labor when installed during framing and waterproofing. Retrofitted installation later requires tile demolition. Specifying aging-in-place during the remodel preserves all options for later years.

Are heated tile floors worth it in a Cape Cod master bathroom?

For most master bathroom remodels on Cape Cod, yes. Electric mat systems add comfort during cold months when bathroom tile is otherwise uncomfortably cold underfoot. Operating cost is modest because the floor only runs during use periods. The system installs between substrate and tile during the existing tile phase, so adding it during a remodel costs significantly less than retrofit.

Can I keep using my home's other bathroom during the remodel?

Yes for most homes. Master bath remodels affect only the master suite bathroom. Other bathrooms remain functional throughout the project. Some homeowners choose to relocate temporarily for the demolition phase due to dust and noise, but household function continues. Discuss occupancy expectations during the initial site visit.

Get Started

Start Your Master Bathroom Remodel Project on Cape Cod

Remodeling a master bathroom on a Cape Cod home is a multi-trade coordination decision before it is a fixture decision, and the difference between a master bath that comes together cleanly across 4 to 8 weeks and one that runs late or leaves trade gaps is whether the contractor sequenced the project correctly from framing through finish. Call (774) 224-8561 or request a site visit, and Jackeline or Marcelo will walk through your existing master bath, discuss configuration tier and layout options, and provide a written line-item scope. Office: 1550 Falmouth Road, Suite 26, Centerville, MA 02632. Approved Hanscom Air Force Base vendor since 2015.